DT 80 assembly blower for hot gas welders

DT80 assembly blower: Light, efficient and quiet

With its impressive performance and remarkably low noise level, it is the perfect solution for demanding working environments. It was developed to make the work process as smooth as possible while offering outstanding performance.

An outstanding feature of the DT80 assembly blower is that it is relatively low-maintenance and even maintenance-free.
This means that you can concentrate on your work without having to worry about constant interruptions for maintenance work.
Another advantage is that it is oil-free, which not only extends the service life of the device, but also protects the hot gas welder with which it is used.

The DT80 mounting fan has an air outlet that cannot be shut off, but still ensures precise and reliable air distribution.
This guarantees an efficient working environment.

For construction site environments, we recommend cleaning the filter with compressed air every two weeks.
This simple maintenance measure helps to ensure that the DT80 assembly blower continuously delivers its optimum performance and remains reliable for a long time.

All in all, the DT80 assembly blower is the ideal choice for anyone looking for a powerful, low-noise and low-maintenance assembly blower.
With its quality and reliability, it will make your work process more efficient and productive.

Suitable for

Hot gas welder 200 for external air, without nozzles.
The heating power of 1500 W 230 V is infinitely variable from 20 to 700 °C and is kept constant electronically. Furthermore, the required air volume can be individually regulated using an additional rotary knob.
Hot gas welder 500 DIGITAL for M10 welding nozzles
With a heat output of 1500 W at 230 V or 1300 W at 120 V, the gun delivers the heat required for precise welding.

Technical data:

Operating voltage	230 V AC
Frequency	50 Hz
Operating pressure range	0.05 – 0.2 bar
Air flow rate at operating pressure	80 l/min
Power consumption	86 W
Weight	5.6 kg
IP protection class	54
Max. Power socket	2200 W

Dimensions:

Length:	315 mm
Width:	214 mm
Height:	238 mm

Further information on compressed air for welding plastics:

In the plastics processing industry, compressed air is often used for various welding techniques.
The compressed air can fulfill several functions, depending on the specific welding process being used.

Hot air welding:
In some plastic welding techniques, such as hot air welding, compressed air is used to direct heated air onto the plastic surfaces to be joined. The heated air melts the plastics and a solid weld seam is created after cooling.
Ultrasonic welding:
In this method, compressed air is used to operate an ultrasonic transducer that generates vibrations. These vibrations cause friction and heating of the plastic surfaces, which leads to their fusion and the creation of a weld seam.
Extrusion welding:
In some cases, compressed air is used to control the extrusion process. Molten plastic material is pressed out of a nozzle and shaped with compressed air to produce a welded joint.

Features:

Precise control:
Compressed air systems for welding plastics often require precise control to ensure the required pressure and optimum air composition.
Adaptability:
The compressed air source should be adaptable to different welding techniques and plastic materials.
Reliability:
A reliable compressed air system is crucial to ensure consistent results in the welding process.
Security functions:
Depending on the specific requirements of the welding application, safety functions such as pressure regulators and safety valves may be installed.

It is important to note that the exact type of compressed air source and its functions depend heavily on the specific welding technology and the requirements of the plastic welding process.

AHLBORN KUNSTSTOFFE

DT 80 assembly blower for hot gas welders