Control damper with socket (version D2) for actuator, made of PVC, white PVC, PPs, PP-H, PE-HD, PP-EL-s, PVDF

Control damper prepared for an actuator, with a socket, a round molded plastic part with an internal stop for connecting pipes in an exhaust air system via welding.

Used as a control damper for adjusting volume flows.

Socket internal diameter in accordance with DIN 8062.

Possible negative pressure upon request after mechanical, chemical, and thermal loading.

All dimensions in mm, subject to changes in dimensions and design!

	PVC					PE-HD/PP-H/PPs/PP-EL-s/PVDF
Ø	L	L1	A	C	s	L	L1	A	C	s
75	35	60	180	92	2,5	35	60	180	92	3
90	35	60	180	92	2,5	35	60	180	92	3
110	40	75	180	92	2,5	40	75	180	92	3
125	40	70	180	92	2,5	40	70	180	92	3
140	40	70	180	92	2,5	40	70	180	92	3
160	40	70	180	92	2,5	40	70	180	92	3
180	50	70	180	92	2,5	50	70	180	92	3,5
200	50	70	180	92	2,5	50	70	180	92	3,5
225	50	70	180	92	2,5	50	70	180	92	3,5
250	50	70	180	92	2,5	50	70	180	92	3,5
280	50	70	180	92	2,5	50	70	180	92	3,5
315	50	70	180	92	2,5	50	70	180	92	4
355	50	75	180	92	3	50	75	180	92	5
400	50	80	180	92	3	50	80	180	92	5
450	60	320	–	–	3,6	60	320	–	–	6
500	60	360	–	–	4	60	360	–	–	6
560	–	–	–	–	–	70	410	–	–	6
600	70	450	–	–	5	70	450	–	–	8
630	–	–	–	–	–	70	480	–	–	8
700	70	520	–	–	6	70	520	–	–	8
710	–	–	–	–	–	80	530	–	–	8
800	80	560	–	–	8	80	560	–	–	8
900	90	650	–	–	8	90	650	–	–	10
1000	100	740	–	–	10	100	740	–	–	10
1200	120	960	–	–	12	120	960	–	–	12
1250	130	960	–	–	12	130	960	–	–	12