Deflector hood with socket made of PVC-U PPs PPs-EL PP-H PE-HD PVDF

Deflector hood with socket. Round plastic molded part with an internal stop for connecting pipes in an exhaust air system via welding.

Designed for vertical air discharge, the housing features a round, flow-optimized design, an internal collection funnel, and a drain pipe for rainwater.

Socket internal diameter in accordance with DIN 8062.

Manufacturing process: made from semi-finished products. Round design; square design from Ø 355 mm.

Possible negative pressure upon request after mechanical, chemical, and thermal loading.

	PVC				PE-HD/PP-H/PPs/PP-EL-s/PVDF
Ø	L	L1	A Ø (xC)	B x C	L	L1	A Ø (xC)	B x C
110	40	290	206	–	40	290	206	–
125	40	340	256	–	40	340	256	–
140	40	320	256	–	40	320	256	–
160	40	410	321	–	40	410	321	–
180	40	380	321	–	40	380	321	–
200	40	410	361	–	40	410	361	–
225	40	430	408	–	40	430	408	–
250	40	470	458	–	40	470	458	–
280	50	520	508	–	50	520	508	–
315	50	440	508	–	50	440	508	–
355	50	1097	600×399	279×399	50	1097	600×399	279×399
400	50	1202	674×448	313×448	50	1202	674×448	313×448
450	50	1322	758×503	351×503	50	1322	758×503	351×503
500	50	1440	840×558	388×558	50	1440	840×558	388×558
560	–	–	–	–	60	1570	923×613	425×613
600	60	1688	1005×668	463×668	60	1688	1005×668	463×668
630	–	–	–	–	70	1818	1089×723	501×723
700	70	1936	1170×778	538×778	70	1936	1170×778	538×778
710	–	–	–	–	80	2066	1254×833	576×833
800	80	2184	1336×888	613×888	80	2184	1336×888	613×888
900	90	2432	1501×998	688×998	90	2432	1501×998	688×998
1000	100	2680	1666×1108	763×1108	100	2680	1666×1108	763×1108
1200	120	3176	1997×1328	913×1328	120	3176	1997×1328	913×1328
1250	130	3306	2081×1383	951×1383	130	3306	2081×1383	951×1383
rectangular design from Ø 355 mm