AKU®-FLON PFA und PFA-HP RUNDSTÄBE ungetempert
Perfluoralkoxy-Polymere (PFA) sind thermoplastische Copolymerisate aus Tetrafluorethylen mit perfluorierten Vinylethern mit hoher Temperaturbeständigkeit und Dauertemperatureinsatz von über 250 °C und sind schweißbar.
Nachstehende Dimensionen der gepreßten Stäbe sind Werkzeugmasse, d.h. dass die Halbzeugmasse um den materialspezifischen Schrumpf von 1,2 % kleiner sind.
Abstandshalter | nicht lagernd, Mindestmenge auf Anfrage |
Abstandshalter | Lagerware ab Werk, Zwischenverkauf vorbehalten MBM auf Anfrage |
Material | Farbe | Nenn AØ | Länge | Gewicht*) |
mm | mm | kg/Stk. | ||
PFA | natur | 9 | 540**) | 0,100 |
PFA | natur | 13 | 540**) | 0,170 |
PFA | natur | 16 | 540**) | 0,270 |
PFA | natur | 20 | 540**) | 0,460 |
PFA | natur | 20 | 1000 | 0,720 |
PFA | natur | 25 | 540**) | 0,680 |
PFA | natur | 27 | 150 | 0,180 |
PFA | natur | 30 | 1000 | 1,610 |
PFA | natur | 32 | 150 | 0,260 |
PFA | natur | 30 | 540**) | 0,970 |
PFA | natur | 37 | 150 | 0,360 |
PFA | natur | 35 | 540**) | 1,300 |
PFA | natur | 40 | 540**) | 1,560 |
PFA | natur | 40 | 1000 | 2,840 |
PFA | natur | 42 | 150 | 0,440 |
PFA | natur | 47 | 150 | 0,560 |
PFA | naturr | 50 | 1000 | 4,430 |
PFA | natur | 52 | 150 | 0,680 |
PFA | natur | 57 | 150 | 0,810 |
PFA | natur | 62 | 150 | 0,980 |
PFA | natur | 65 | 150 | 1,100 |
PFA | natur | 70 | 150 | 1,250 |
PFA | natur | 72 | 150 | 1,350 |
PFA | natur | 75 | 150 | 1,550 |
PFA | natur | 78 | 150 | 1,650 |
PFA | natur | 83 | 150 | 1,750 |
PFA | natur | 96 | 100 | 1,650 |
PFA | natur | 100 | 1000 | 17,680 |
PFA | natur | 109 | 100 | 2,050 |
PFA | natur | 125 | 100 | 1,350 |
PFA | natur | 130 | 100 | 2,880 |
PFA | natur | 176 | 100 | 5,280 |
PFA | natur | 250 | 50 | 4,900 |
PFA Stäbe gefertigt aus Dyneon 6502CZ
*) Gewicht = theoretisches Gewicht, Verrechnung erfolgt zum tatsächlichen Gewicht!
**) Stäbe haben durch horizontalen Pressvorgang Mittelnaht bzw. Ovaliät und müssen überdreht werden!
Für Ø6, Ø7, Ø8, Ø9, Ø10, Ø13 mm besteht gelegentliche Fertigungsmöglichkeit auch in 1 m Länge,
Mindestmenge auf Anfrage.
Alle Produktbezeichnungen mit ®=reg. Warenbezeichnung, sind Eigentum des jeweiligen Herstellers
Ahlborn Kunststoffe – Informationspflicht Lt. § 5 Abs. 1 E-Commerce-Gesetz
All rights reserved AKU© 2023